5
WIRED MULTI-FUNCTION CONTROLLER
With the remote controller connected to the DSP, you can enjoy the following
operation to the DSP:
1. Main volume control, Slave volume control, Mute
2. Switch between the last song and next song from Bluetooth/USB Drive
3. Switch Input source
4. Switch Presets
HI:
High level input
LOW:
Low level input
AUX:
AUX input
OPTICAL:
Optical input
BTA:
Bluetooth Audio Streaming
USB:
USB Drive Audio Player
Source:
Input source switch
Memory:
DSP Presets switch
Memory1.2.3.4:
DSP presets
Previous and next song:
only for Bluetooth
audio and USB Drive audio input.
Knob in the middle:
Main level control,
Group level control, Mute.
A.
When connected to
DSP unit, the LED will light
up blue color when the
amplifier is turn on. This is
Main (all channels) output
level control mode.
B.
Push the knob to Mute
(LED changed to red
color), push again back to
Main level output control.
C.
Long push the knob for
over 3 seconds the LED
change to green for Group
level control mode.
Note:
Group level control mode only control the output level of the channels that
chosen on the software as SLAVE. If no channel is chosen as SLAVE on DSP setup,
there’ll be no fuction at this mode.
Panel Introduction
Summary of Contents for DSP12i
Page 2: ......
