Series PC Manual V 1.0 - Rev. 3
– 03/01/01
DS Europe
30
figure 14: Lower view of container for housing PC Series electronics
figure 15
: Detailed view of push buttons and LEDs used for calibration.
One of the advantages of using the series PC is the possibility to be able to use only
one part of the nominal stroke of the transducer without having to alter the stability
and resolution of the transducer.
12.3 REMOTE CALIBRATION
All the settings relative to series PC calibration are memorised in an built-in EEPROM
memory.
With this kind of memory the data storage is mantained even when there is no
transducer power supply nor a built-in battery.
One of the features of EEPROM memories, that must always be considered while
using the transducer, is that despite the fact the maximum number of storage cycles
on these memories is very high, it is finite ( a maximum of 10.000 typical storage
cycles, according to statement made by Manufacturer of memories in question).
However, for typical transducer use, the specifications of these memories are more
than sufficient.
The calibrating procedure by means of remote computer is described in the chapter 13
with the digital protocol.
Casing screws
Casing screws
