![background image](http://html.mh-extra.com/html/ds-produkte/sp150003/sp150003_instruction-manual_2533898031.webp)
31
EN
Step 3: Attaching the Jumping Mat Cover
1. The jumping mat cover is placed
over the rope loops from above.
2. For each leg, there is a tab on the
bottom of the cover which you pull
over the legs of the trampoline.
3. Then pull the cover on tight with the
tugs at the side and knot the tugs
onto a leg.
Step 4: Fitting the Support Bar
• TIP: Should you have any problems attaching the cross struts (10), simply
interchange the
fi
ve frame parts with one drilled hole with each other.
• NOTE: If you notice that the frame structure does not rest
fl
at on the
fl
oor,
you can compensate for the differences in height between the support bar
(8) and the opposite foot by inserting the four washers which are also sup-
plied (16+17). The large washers (17) can be inserted into the PVC cap of
the support bar and the small washers (16) can be inserted into the rubber
foot of the base. Following insertion, check whether the feet are in stable
contact with the
fl
oor. Please note: The support bar must not be longer than
the foot, i.e. the foot must not be suspended in the air!
Summary of Contents for SP150003
