23
If you want to use the mixing container:
– Unscrew the bottom cap of the mixing container and, depending on your requirements,
screw the cross-blade or
fl
at-blade attachment onto the mixing container (see the
"Accessories" chapter, "Cross-blade and
fl
at-blade attachment" section).
– Turn the lid of the mixing container anticlockwise and remove the lid.
– Pour the ingredients you want into the container and then close the lid again. Make sure
that the lid sits on the container so that the pouring spout is completely closed shut!
• If you want to use the sieve insert,
fi
rst place the insert into the (empty!) mixing
container. Make sure that the little bars inside the container sit correctly in the
notches in the sieve insert.
• For juicing, you should only feed the pieces of fruit or vegetables into the
mixing container after the device has been switched on (see step 5).
3. Now place the
fi
lled container into the motor unit (the blade
attachment is "sunk" into the motor unit; see illustration). Make
sure that the locking lugs on the beaker or mixing container
rest correctly in the recesses of the motor unit.
4. Insert the mains plug into a properly installed mains socket that
is easily accessible.
5. To switch on the device, press the container down slightly and
at the same time turn it clockwise until it engages. Always keep
hold of the motor unit with one hand while preparing food.
If you are using the mixing container, remove the insert in the
middle of the lid to add ingredients. You can use the plunger
to continuously feed in more ingredients.
6. To switch off the device, turn the container anticlockwise again until you feel some resistance.
Always wait until the blades have come to a complete standstill before you remove the
container.
04911_DE-GB-FR-NL_V0.indb 23
04911_DE-GB-FR-NL_V0.indb 23
03.07.2013 14:29:15
03.07.2013 14:29:15