![background image](http://html.mh-extra.com/html/ds-produkte/01784/01784_instruction-manual_2533911019.webp)
19
EN
Care
To ensure that the steam cleaner can clean with full force, the water reservoir (
9
) should
be descaled at regular intervals (after approx. 25 – 50 uses).
1. Pour a mixture of one part vinegar and two parts water into the water reservoir (
9
).
2. Position the device in such a way that the steam that is emitted does not hit any deli-
cate
fl
oors or other objects.
3. Insert the mains plug into a properly installed plug socket that is easily accessible.
4. Move the On / Off switch (
7
) to position
I
to switch on the device.
5. Allow the vinegar/water mixture to run through once completely until the water res-
ervoir (
9
) is empty.
6. Move the On / Off switch (
7
) to position
0
to switch off the device and pull the mains
plug out of the plug socket.
7. Rinse the water reservoir (
9
) with fresh water to remove vinegar residues and odours.
Troubleshooting
If the device does not work properly,
fi
rst check whether you are able to rectify the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
The device does not work. No steam is emerging.
• Is the mains plug inserted in the socket correctly?
• Is the socket defective? Try another socket.
• Check the fuse of the mains connection.
• Is the device switched on? Move the On / Off switch (
7
) to the
I
position.
• The device is not yet ready to operate. The device needs to heat up for around 20 –
30 seconds before the steam can emerge.
• The water reservoir (
9
) is empty. Top up the water reservoir (
9
) again (see “Filling
the Water Reservoir”).
• Is the device scale-encrusted? Descale the water reservoir in the manner described
in “Cleaning and Care”, in the “Care” section.
Technical Data
Model number:
JC-232
Article number:
01784
Power supply:
220 – 240 V ~ 50 Hz, 1000 W
Protection class / rating: I, IPX4