DS Maref DVT-2600, User Manual

Page: 27 / 144

ENGLISH
4-5-4. Mode Button
Sets the mode to be operated. The default setting is set to DVT Mode during initial Power
on.
4-5-5. START/STOP Button
Starts or stops the operation. It goes back to STOP mode when the user presses START/
STOP button during the error mark on the screen.
4-5-6. LCD display screen
Batteries status indicator
DVT-2600 is equipped with a battery pack as standard. There are four battery status
indicator LED's used to represent the charge level of the battery.
AC power indicator
AC power indicator represents one of power input or the fail of power input.
Battery charging indicator
Indicates whether batteries are charging. Indication of the battery charge level will not be
displayed when the unit is off. The indicator for battery charging will be displayed only
when the batteries are not fully charged.
The batteries require the device to be powered on for charging. Warranty period for the
batteries will be 6 months after the date of purchasing.
This product is recommended using AC cord since it has the possibility lower pressure
on battery mode.
Check the service manual for battery specifications and replacement instructions.
Battery fully charged
Battery is charging
Out of battery
Power plugged in
Battery needs to be recharged
Battery is 50% charged
27