5
Important Safety Information
Operator’s Manual
The JetMounter™ JM63 Fuzion XD performs mounting and laminating applications by using two
rollers to apply uniform pressure to mounting adhesives and overlaminating
fi
lms. The point where
the rollers touch these materials is called the “Nip”. This area creates a potential pinch hazard for
fi
ngers or other objects.
TO AVOID INJURY, ALWAYS KEEP YOUR FINGERS AWAY FROM THE
NIP AREA.
When using a large supply roll, be aware that a pinch hazard may exist between the top roller and
the supply shaft. When working from the rear of the machine, be aware of the pinch point (Nip) of
the contacting rollers and exercise extreme caution to avoid injury.
Exercise caution when lifting rolls of adhesive or laminate due to their weight. Obtain assistance to
avoid personal injury or damage to the equipment and materials.
No persons under the age of 16 should be allowed to operate the equipment.
DO NOT operate the equipment while under the in
fl
uence of alcohol, prescription drugs or any other substance that
could impair your judgment or reaction time.
Remove any jewelry such as rings, bracelets and necklaces prior to operating the equipment. Keep loose clothing,
neckties, arti
fi
cial
fi
ngernails, long hair, and anything else that might easily be drawn into the rollers away from the
machine.
Always work at a slow speed until you become familiar with the equipment.
Power “Off” the machine when loading rolls of adhesive or laminate, cleaning the rollers, or performing other activities
that require close proximity of
fi
ngers to the Nip area. Doing so will prevent the machine’s rollers from inadvertently
turning. During machine operation, keep
fi
ngers away from the Nip area.
Always disconnect the equipment from the power supply before removing any panels for
service.
