![Drytac Jet Mounter JM18 Operator'S Manual Download Page 8](http://html.mh-extra.com/html/drytac/jet-mounter-jm18/jet-mounter-jm18_operators-manual_2533299008.webp)
8
objects.
DO NOT OPERATE THIS EQUIPMENT IF YOU ARE UNWILLING TO ACCEPT
THIS HAZARD!
TO AVOID INJURY, ALWAYS KEEP YOUR FINGERS AWAY FROM THE
NIP AREA.
No persons under the age of 16 should be allowed to operate the equipment.
The following safety features are designed to offer a reasonable measure
of protection against injury while maintaining an operator-friendly machine. Please do not
attempt to disable or alter their functionality in any way.
Any modifications will void the
warranty and pose a serious risk to the operator.
Contact Drytac Technical Services if
any malfunction of the equipment occurs and
stop using the machine immediately!
Models are equipped with an electric eye in front of the roller Nip which, when interrupted,
will stop the rollers immediately and sound a buzzer as a warning to indicate that an object is
breaking the photocell circuit. This occurs when t
he mode switch is set to “Auto”. Please be
particularly cautious when operating the
Jet
Mounter
™
in the Foot Pedal mode because in
this mode the rollers WILL NOT STOP when the photocells are interrupted. An audible alarm
will sound, but the rollers will continue to turn at a reduced speed.
Prior to operating the laminator, always check that the photocell and buzzer are working
properly. Select the Auto mode and use a piece of cardboard to block the photocells to
confirm that the alarm sounds and the rollers stop.