LPV1200 DUO SYSTEM
Page 21 of 40
1
Shaft of the mandrel
2
Cold film with lining paper
3
Paper tube
4
Positioning sleeves
5
Adjust nuts
6
Fastening screws of positioning collar
7
Positioning collar
Installations and Adjustment Methods for backing Paper Roller (please refer to Figure 9)
1. Make anticlockwise turns of pressure adjustment nuts on the right, to take the backing
paper roll down. A clockwise turn helps to load the roll on.
2. The paper tube for collecting backing paper may be loaded on the backing paper roller, or
stick the backing paper onto the backing paper roller directly after being separated with
the film.
3. The backing paper roller is driven by fabrication forces: the fabrication force and torsion
movement of driving will be increased when the pressure adjust hand wheel of backing
paper roller is turned clockwise. An anti clockwise turn can decrease them.
(Figure 8)
