LPV1200 DUO SYSTEM
Page 29 of 40
1
Front lower roller
2
Front working panel
3
Front upper roller
4
Pressure-adjust linkage shaft
5
Upper guide roller
6
Thermo-sensitive film
7
Film mandrel
8
Rear upper
roller
9
Rear lower roller
10
Lining paper roller
11
Lining paper
12
Lower guide roller
3. Functions Set-up:
1) Press heating switch when high temperature is needed.;
2) Press single-side heating switch when single-side laminating is required;
3) Turn the temperature knob to proper temperature for laminating
（
If the machine
heating is completed, the working indicator will turn from red flicking to green
normally-on
）
;
4) Adjust the speed adjustment knob to the speed you require;
4. Methods for Feeding Text & Drawings Into Covering Films:
Method 1: Adhere the text and drawings neatly to the backing paper with adhesive tapes.
Note:
▲
The two side edges of text and drawings should be vertical with the
rollers, so as to avoid declining during operations.
▲
The text and drawings should be wider than the adhesive film so as to
avoid adhering to the rollers’ surface.
If you want to achieve a quick rise of temperature, you can turn the button
to Double-side, and then turn to Single-side when the temperature reaches
