Operation
4-1
4. Operation
Once the unit has been connected to both power and fluid lines, follow the operation guidelines
below to adjust the temperature of the outlet air. Be sure to entirely read and understand this
section before trying to start and run your new DRYAIR ES200 system.
Controls
Thermostatic Control
•
The thermostatic control is adjusted by hand on the bottom
of the control panel face. Simply adjust to the desired
temperature and the fan will cut in and out to maintain the
set temperature.
Variable Speed Control
•
The fan speed dial is located in the center of the control
panel face and is adjusted by hand.
Figure 4-1 Control Panel
