DRYPRO
™
7000 OWNER’S MANUAL
3
Warning!
The fan blade is sharp! Do not
touch the edges with your hands,
serious personal injury may result.
Fan Motor:
Carefully remove dust and
debris from the fan motor and blade
assembly whenever you remove the
unit’s cover for interior cleaning.
Drain Hose:
Inspect the gravity drain
hose to make sure it is in good condition.
The hose should be checked before your
DryPro
™
7000 Dehumidifier leaves the
shop and again before the unit is left on
the job.
Make sure that the drain hose is
not
kinked or cracked. Avoid leaving the
drain hose in a folded position during
transport and storage.
DryPro
™
7000
FEATURES
The DryPro
™
7000 utilizes a 6,670 BTU
rotary compressor and “hot gas” bypass.
The DryPro
™
7000’s temperature
sensitive, intelligent “hot gas” defrost
not only activates only when
environmental conditions dictate but,
once engaged, gets the coils defrosted
and back into action much faster. This
means that the DryPro
™
7000 is pulling
water out of the air while other units are
defrosting.
To provide more protection for the coil,
the DryPro
™
7000 has an easily
removable and washable Quadrafoam
Filter. It is made with a special Uni-
Grid support and aluminum frame.
The DryPro
™
7000 features extra large
12 inch wheels to provide easy mobility
and two flip-up, rubber sleeve handles
mounted on both sides of the unit. This
makes transport much safer. Back strain
and stress is reduced during handling so
there is less chance of the unit being
damaged.
Several units can be operated on the
same circuit. A stainless steel chassis
provides a tough exterior that protects
the unit and will keep looking great for
years.
SPECIFICATIONS
Height: 17”
Width: 14”
Depth: 20”
Weight: 73
LBS
Operating Range: 33
°
F – 100
°
F
Max Capacity 120 Pints
Airflow: 200
CFM
Compressor: 6,670 BTU
Power Supply: 110/120V / 60 Hz
230V / 50 Hz
Amperage: 6 Amps
Refrigerant: R - 22
REPAIRS
1.
Should an electrical component fail
consult your Distributor or the
Factory Service Center to obtain
OEM parts.
2.
If a problem develops in the
refrigeration system, only a certified
refrigeration technician can correct
it. Contact your Distributor or the
Factory Service Center for more
information.
3.
For technical support and general
information, contact your Distributor
or the Factory Service Center.
