12
Characteristic
Requirement
Pressure at point of connection
Min. 6 Bar (88.2 psi)
Max. quantity of particles in suspension
15 mg/Nmc
Max. diameter of particles
0.05
Dew point
2° C (35.6 °F)
Max. quantity of oil in suspension
5 mg/Nmc
Whenever not utilizing natural base oils compatible with existing health regulations, it is necessary to adjust
the mixer pressure so as to avoid the formation and dispersion of oil mist into the environment.
The mixing pressure is indicatively between 1 bar (14.7 psi ) and 2.5 bar (36.7 psi).
14. CONTRAINDICATIONS
The VIP4Tools
Pro
panel does not have any particular contraindications except for the following points:
The operator coming into contact with fluid due to breakage/opening of supply tubing.
The operator must be furnished with suitable personal protection clothing/equipment (according to
current regulation).
Abnormal posture.
Take note of the indications shown in
paragraph 6.2.
Contact with oil during filling/maintenance.
The operator must be furnished with suitable personal protection clothing/equipment (according to
current regulation).Use of unsuitable lubricants.
Main inadmissible fluids.
Fluid
Danger
Lubricants with abrasive additives
High wear rate of contacted parts
Lubricants with silicon based additives
Seizure of the pump
Petrol
– solvents – flammable liquids
Fire
– explosion – damage to seals
Corrosive products
Corrosion of the pump
– injury to persons
Water
Oxidation of the pump
Food substances
Contamination of the substances themselves
