13
4.4 Storage
Empty the pump of any oil or grease and close the intake and outlet with the specific protection. The pumps must be
stored in their own packaging and kept in covered, dry, protected places that are not exposed to direct sunlight and at a
temperature that falls within the range indicated on the technical specifications table.
4.5 Environmental conditions
The pump must be installed and used in a covered and sufficiently lit facility.
The installation area
must possess all the requirements in terms of heights and air exchange, and it must comply with the
requirements set by the relevant prevailing regulation.
Temperature
The required work environment temperature values are indicated on the technical specifications
table.
Lighting
All the areas must be lit in a uniform way and sufficiently to guarantee all the operations foreseen in
the manual, preventing areas of shade, reflections, glaring or fatiguing for the vision.
4.6 Installation
No pump installation operations are required. The pump is secured to a metallic pallet which allows
safe handling with a pallet jack or a forklift. The pallet itself is designed to be able to be installed in
the system since it is equipped with 4 Ø14 mm holes suitable for floor-mounting. Provide adequate
spaces (as per the installation diagram) to prevent abnormal posture or the possibility of impact.
Subsequently, as previously described, the pump’s hydraulic connection to the machine must be
made, followed by the connection to the control panel.
DANGER
The pump connections must be made only by qualified and specifically trained personnel.
