Drone Rescue Systems DRS-M300, Manual

Page: 20 / 54

Parachute Manual DRS-M300 v2.3-EN (2022-08-10)
©2022 Drone Rescue Systems GmbH 19/26
6 Flight
Pre-Flight Inspection
To ensure a safe and reliable operation visually check the following components before each
flight. Verify that
• there is no visual damage to the elastic rubber springs of the container or any other
component
• all cables are connected tightly and fixated in the clips
• all screws that fix the mounting plate of the DRS M300 connector are pulled tight
• the spacers , especially the short one which fixes the plug of the DRS M300 connector
is pulled hand tight
• the container is fully under tension and the deployment base is at the bottom
• the parachute is packed in the plastic cover and the rubber bands which secure it have
been removed
• the parachute is fully loaded inside of the container and no parachute fabric is
protruding
• the container is rotated to its locked position
• the parachute is properly linked to the UAV with the cords , the hook , and the hook
protection sleeve
• the container lid is tightly clipped on the top of the container
• the container cord is linked to the UAV and is connected to the safety cord of the
container
• the parachute cords are stashed inside the cord box and the cord box lid is clipped
onto it
In case of RC variant, additionally verify that:
• the Emergency Trigger is prepared and the battery is fully charged