Position the second centre
plate over the boom cluster
Ensure you align the hole
pattern and front notches
so the screws are showing.
Fit the M4 alloy nyloc nuts to
the screws - do not tighten
them, just make them secure
whilst you work your way
around.
Push the M4 x 30mm alloy screws through
the centre row of the boom mount pattern.
Turning the plate upside down slot the boom
bracket inners onto these screws.
Lay the booms over the protruding screws.
You will notice both ends have holes drilled.
Please ensure you use the holes that
closest to the end of the boom. These holes
are 11mm from the edge.
x8
x8
x8
Place the remaining boom bracket inners on
top of the booms through the screws.
x8
3
4
5
6
26
x8
NOTE: For this model the curve of the
inner boom brackets face outward against
the curvature of the plate and the outer
boom brackets face inward following the
curvature of the plate.
Summary of Contents for SkyJib 6
