Droidworx SkyJib 6, Build Manual

Page: 20 / 49

Take a moment to familiarise yourself with the centre plate setup
to get an understanding which holes relates to which parts. Take
one of the plates and lay it out with the notch at the top and the
sticker facing up.
Lines indicate the boom
mount triangle pattern
used for all models.
Circles show the
holes used for dome
fixing.
Squares represent the remaining holes
you can attach the standoffs to. This
is all dependent on which electronics
you will be using. In this guide we
will demonstrate how to attach the
Universal Adapter Plate we send with
all of our crafts.
The notch indicates the front of
the craft and the sticker ensures
you have the plate the correct
side up.
Fit the electronics standoffs by slotting the
supplied nylon M3 x 6mm countersunk
screws through the desired holes from
the underside. Please ensure the holes for
the dome fixing and the triangle boom
mounting pattern are not used for this.
x4
x4
1
2
20