3
3.- SAFETY INSTRUCTIONS
These instructions must be read carefully in order to install and
use the set properly and to keep it in perfect working condition
and to reduce the risks of misuse.
Do not use this set on machines for the lifting of persons or in
potentially explosive atmospheres.
Any use other than that specified in this manual is dangerous.
The following instructions must be strictly adhered to.
Strictly adhere to the instructions for installation contained in this manual
3.1.- WHAT YOU MUST DO
_
Make sure that professional and competent personnel carry out the installation.
Ensure that all site and prevailing safety regulations are fully respected.
Make sure that this manual is permanently available to the operator and
maintenance personnel.
Keep the transmitter out of reach of unauthorized personnel.
Remove the transmission key when the set is not in use.
On starting each working day, check to make sure that the STOP button and
other safety measures are working.
When in doubt, press the STOP button.
Whenever several sets have been installed, make sure the transmitter you are
going to use is the right one. Identify the machine controlled on the label for
this purpose on the transmitter.
Service the equipment periodically.
When carrying out repairs, only use spare parts supplied by Drivecon, Inc.
3.2.- WHAT YOU MUST NOT DO
Never
make any changes
to the set that have not been approved
by
manufacturer.
Never power the equipment with power supply other than specified.
Never allow unqualified personnel to operate the equipment.
After use, never leave the equipment ON. Always use the contact key or the
STOP button to avoid accidentally activating motion commands.
Do not use the set when visibility is limited.
Avoid knocking or dropping the set.
Do not use the set if failure is detected.
