This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that may not be
reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2015) Drivecon. All rights reserved.
(25)
SWITCHING BATTERIES PWRLynk-TX8A
WARNING! Do not recharge the batteries. Attempts to recharge may cause rupture or the leaking of
hazardous liquids, which will corrode the equipment.
IMPORTANT! Electronics and batteries must be physically separated before disposal. Make sure that
electronics or batteries are not thrown in the household waste.
1. Take off the transmitter battery lid by unscrewing the 2 screws with a screwdriver.
2. Switch the 3 x 1.5V AA batteries. Use alkaline batteries for optimal performance.
3. Put the transmitter battery lid back on using the screwdriver.
Battery type: 3 x 1.5V AA alkaline batteries/LR6 Alkaline
BATTERY PRECAUTIONS
Observe the following general battery warnings:
As batteries contain flammable substances such as lithium or other organic solvents, they may cause
heating, rupture or ignition.
Risk of explosion if battery is replaced with a battery of an incorrect type.
Do not short circuit, disassemble, deform or heat batteries.
Never try to charge a visibly damaged or frozen battery.
Keep batteries out of reach of small children. Should a child swallow a battery, consult a physician
immediately.
Avoid direct soldering to batteries.
When discarding batteries, insulate the + and - terminals of batteries with insulating/ masking tape. Do
not put multiple batteries in the same plastic bag.
