This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that may not be
reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2015) Drivecon. All rights reserved.
(22)
SWITCH CHANNEL
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Pull out the stop button.
4. Release button 8.
Top LED flashes (green).
5. WITHIN 1 MINUTE FROM PULLING OUT THE STOP BUTTON:
Enter the code: 1-2-3-4 (press the buttons 1, 2, 3, 4).
The transmitter LEDs 1- 4 (red) light up. If the code is invalid, the transmitter turns off. If the code is
accepted, the top LED flashes (green). The transmitter LEDs 1-4 (red) starts to flash.
6. WITHIN 1 MINUTE FROM ENTERING THE CODE:
Press button 8. Keep pressed.
7. Press button 4. Release.
8. Release button 8.
The top LED lights (green). LED 2 (red) flashes.
9. Select channel 11-26.
For example: Press button 2 for the first digit in channel 20. To enter the zero, press button 8. Keep
pressed. Press button 4. Release button 4. Release button 8.
LED 3 (red) lights when a valid digit has been entered.
LEDs 3 and 4 (red) light when two valid digits have been entered.
The top LED flashes (green) 3 times. The transmitter turns off.
Press button
For digit
1
1
2
2
3
3
4
4
5
5
6
6
8 (shift) +1
7
8 (shift) +2
8
8 (shift) +3
9
8 (shift) +4
0
