USER: BEFORE using this product read this manual, containing important information on cleaning and
maintenance, and save for future reference.
1 General
1.1 Symbols
Signal words are used in this manual and apply to hazards or unsafe practices which could result in
personal injury or property damage. See the information below for definitions of the signal words.
2 Cleaning Instructions
WARNING
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result in property
damage or minor injury or both.
WARNING
Mattresses MUST be cleaned regularly after each patient use. Because of the potential risk of
infectious exposure, cleaning with the patient on the bed is not recommended. All equipment
should be inspected. Any item that is visibly soiled with the patient’s blood or other bodily fluids
should be properly cleaned or removed. Staff members should treat all soiled bedding as if it
were contaminated with pathogenic microorganisms. Staff members should wear appropriate
protective clothing when cleaning mattresses. All cleaning solutions must be properly diluted
according to the manufacturers’ instructions. Follow standard institutional wipe down and
infection control procedures. DO NOT open the zippered mattress top cover during cleaning,
infection control procedures or during use.
Gives useful tips, recommendations and information for efficient, trouble-free use.
i
Cover Material:
• Urethane Coated Nylon
Wipe down the overlay with a damp cloth pre-soaked with warm water containing a mild detergent. Approved intermediate level
disinfectants may be used according to the cover material. The cover can be completely removed for laundry with water
temperature up to 95°F; however, it is recommended that the user still check with local policy to determine the time/temperature
ratio required to achieve thermal disinfection. After cleaning, please avoid dust and proximity to dusty areas. All parts should be
air dried thoroughly before use.
