drive.web automation
XIO Build
S7, HV, CL, XD, XA
S7
- Standard, no XIO option installed.
HV
- Ten Digital Inputs, presets for 24VAC, 120VAC, or 240VAC.
Six Digital Outputs, 24VAC to 240VAC, 0.5A with ZVS.
CL
- Sixteen 4-20mA inputs.
Eight 4-20mA outputs.
Eight digital out/in, separate source up to 24VDC, 300mA shared.
XD
- Sixteen digital inputs, 3V to 30V logic with 5V and 24V enumeration.
Sixteen digital outputs/inputs, separate source up to 24VDC, two
300mA shared banks.
XA
- Four separately-isolated, milliVolt analog inputs w/ 5V excitation and
cold-junction compensation for load-cell, thermocouples, RTDs, 2V max.
Terminal Type
P
P
- Plug-in screw terminals; six blocks of 10 terminals; 60 total. See page 4.
Mounting
D, S, F, A, 4
D
- DIN rail edge mounting without flex clip.
S
- DIN rail side, flat mounting using standard clips.
F
- Flex mounting; DIN rail edge or DIN rail flat with flex clip.
A
- Spacer mounting with four bolt holes, see page 5.
4
- NEMA4X enclosed.
smarty
7
Installation
smarty
is designed for permanent installation by qualified professionals.
Install
smarty
in metal enclosure with no RF noise source.
DIN rail mounting
- Use 35x7.5mm rail per IEC 60715 or EN50022.
Environment
- UL/IEC Pollution Degree 2.
Operating temperature, 0°C min., 40°C max.
Storage temperature, -20°C to 50°C.
Altitude 3000m max.
Humidity 95% max. non-condensing.
Clearances
must be provided all around to promote airflow, 5mm (0.2”) sides,
25mm (1”) above and below.
smarty
7
Terminal Naming and Ratings
Terminal names are consistent in the
drive.web savvy
software, on
the terminal, and on the cover plate next to the terminal.
24VDC and 0V
Terminals are internally connected.
Regulated DC Supply, 25.2Vmax, 22.8Vmin, 1A.
External
1A fast-acting fuse or current-limiting is required!
Do not connect to a distributed DC power network.
Supply from Class 2, LPS, limited power supply, from
within the same electrical enclosure, only.
AI
- Analog inputs. -11VDC to +11VDC, 100k
Ω
, 1kHz, 16-bit. Also
configurable for 5V or 24V logic digital input. 30V max.
AO
- Analog outputs. Bipolar, -10.5VDC to +10.5VDC. 10mA.
DI
- Digital inputs. 50VDCmax, 8VDC threshold, 3V hysteresis. 1kHz.
Configurable as event inputs.
DO
- Digital outputs. 24VDC source, up to 300mA, shared.
Resistive, general use, and pilot duty. Overcurrent protection
and software indication. Also configurable as digital inputs.
Maximum Voltage is 25.2VDC.
smarty
HG504266Iss1.0
Page /12
3
