www.petsafe.net
11
10
www.petsafe.net
EN
KO
4. Replace the Pre-Filter over the Flow Control Knob by
sliding the narrow end in first. The lip on the top of the
Pre-Filter will be facing the front of the Pet Fountain,
push down to snap it into place over the Flow Control
Knob (
Fig. 12
).
5. Replace the Charcoal Filter and Housing Lid.
Pump Maintenance
Important:
Cleaning the Pump is essential to the longevity of the Pet Fountain, as
well as the cleanliness of the water. Clean the Pump every 2 weeks. Warranty may be
voided if the Pump is not cleaned.
1. Remove the Pre-filter and Housing from the Bowl.
2. Gently lift the Pump out of its resting place. Suction cups on the bottom of the
Pump will hold it in place. A small amount of force may be necessary.
3. Once the Pump is out of the Pet Fountain, with your thumb and forefinger, gently
squeeze on either side of the Faceplate, and pull off. It may be necessary to insert
a fingernail into the seam of the Faceplate to pry it off (
Fig. 13-14
).
MIN
MAX
Fig. 12
Impeller
Intake Plate
Faceplate with
Flow Control Knob
Pump
Fig. 13
Fig. 14
