petsafe.com
5
6
6. Remove the teardrop shaped stator by pulling up
on the small lip.
7
7. Use a fingernail to pull out the impeller, which is
held in place magnetically.
8. Rinse all fountain components (except for the
adaptor) with warm water before using the pet
fountain. This will remove any residue from the
manufacturing process.
9. Reassemble the fountain.
10
10. Remove the flow control cap from the filter housing
by lifting up. Gently lift up on the spout ring to
access the filter housing cap.
11
11. Unscrew the filter housing cap.
