Drinkpod DPWPA700CTB, Manual

Page: 8 / 12

5. DECSRIPTION OF NIGHT LIGHT & PROGRAM MEMORY
* The night light is always on with default show blue light.
* When dispensing the hot water the night light will turn red.
* When dispensing cold water the night light turn blue color.
* When dispensing the mix-water the night light turn red and blue both.
* When the machine is powered off, all settings data default save for one week long,
otherwise you need re-setting.
* Any buttons are touched, the buzzer will be activated, and the sound will be chord voice.
6. MACHINE FIRST TIME USE ATTENTIONS
1) Before power on, please check whether the raw water pipeline is well connected?
Connect the power plug to the power supply, the operation panel is as shown on the
below:
make sure the heating switch on the back of the machine Is on OFF(0)status
[
Note: ON-(1) side, OFF-(0) side]
2) Hot water first filling operation: After power on, the
O
button lights up and show
red and flashing.
First of all, you must press
O
and then push
LP
button to dispense hot water for 1
liters till water come out from nozzle .
3) Cold water first filling operation:
After the hot water first filling operation ,you must press
[;J
start the cold water
dispens 1 liters until there is water come out from nozzle
Press
@
or
[;J
to start the cold water small/ big cup dispensing.
4) Turn on the heating switch at the rear of the machine to start the heating function.
7. Drying heating alarm and compressor protection function
1) When the hot water detects there is dry heating, the machine heating malfunction .
Both
LP
and � button flash at the same time. and the dry-heating alarm can be
- 07 -