Drinkpod DPWPA700CTB, Manual

Page: 5 / 12

to dispense cold water and indication of cooling status.
A. Push
@
to dispense the cold water (The default volume is 180ML). the
@
light
show blue. when dispensing over
@
Light turn back white. you can press any button
to stop in advance.
B. When the machine is in cooling status,
@
light always show blue, Until the cooling
over,
@
turn back shows white.
6) � Blue and white two-color light, used to dispense mixed water and indication of
UVC-Led working status.
A. Push � to dispense the mixed water {The default volume is 180ML ). the � light
show blue. when dispensing over � Light turn back white. you can press any button
to stop in advance.
a. Mixed water cold and hot water distribution ratio table
Needed capacity Cold capacity Hot capacity
180ml 80ml 100ml
Note: This data is based on hot water at 90 ·c and cold water at 20 ·c. The temperature of the
mixed water will change due to the temperature difference between cold and hot water. The
designed mixed water temperature is 30-45 ·c.
b. Mixed water principal: cold water and hot water are dispensing separately, cold water
is dispensed first, and hot water is dispensed after the cold water is over.
B. When UVC-led working, � shows blue, When UVC stops, � shows white, when
UVC fail, the� flash blue all the time.
UVC Led Working principle:
After the machine is powered on for the first time, the UVC-LED lamp automatically
start working 2 hours, then turn off for 1 hour, Repeat such loop (working 2 hour and
stop 1 hour) as a cycle, When taking cold water the UVC working.
During UV working status� key shows blue, when UV stops, �key shows white
when UV fails, the � key flash blue always.
4. SETTING
A. Water temperature setting
To get into the setting. Y ou need to first Unlock it. S imply Press the Red Lock Button O nce in order
to Unlock it.
Next, Press the Lock Button Together with the Pitcher I con Button.
Y ou are now in the program Mode.
I ts S tarts with the Cold S etting.
- 04 -
( Scan Here To Watch Video )