Page 4
For technical questions, please call 1-888-866-5797.
Item 61204
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Grounding Instructions
TO pREVENT ELEcTRIc SHOcK AND DEATH FROM INcORREcT GROUNDING WIRE
cONNEcTION
READ AND FOLLOW THESE INSTRUcTIONS:
110-120 V~ Grounded Tools: Tools with Three prong plugs
1. In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
2. Do not modify the plug provided – if it will
not fit the outlet, have the proper outlet
installed by a qualified electrician.
3. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
The conductor with insulation having an outer
surface that is green with or without yellow
stripes is the equipment-grounding conductor.
If repair or replacement of the electric cord or
plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
4. Check with a qualified electrician or service
personnel if the grounding instructions are
not completely understood, or if in doubt as
to whether the tool is properly grounded.
5. Use only 3-wire extension cords that
have 3-prong grounding plugs and 3-pole
receptacles that accept the tool’s plug.
6. Repair or replace damaged or
worn cord immediately.
125 V~ 3-prong plug and Outlet
(for up to 125 V~ and up to 15 A)
Grounding
pin
7. This tool is intended for use on a circuit that has
an outlet that looks like the one illustrated above in
125 V~ 3-prong plug and Outlet
. The tool has a
grounding plug
that looks like the plug illustrated above
in
125 V~ 3-prong plug and Outlet
.
8. The outlet must be properly installed and grounded
in accordance with all codes and ordinances.
9. Do not use an adapter to connect
this tool to a different outlet.
cut-Off Saw Safety Warnings
1.
For your Own Safety Read Instruction
Manual Before Operating Grinder
2. Wear eye protection.
3. Use grinding wheel suitable for speed of grinder.
4. Replace cracked wheel immediately.
5. Always use guards and eye shields.
6. Do not overtighten wheel nut.
7. Use only flanges furnished with the grinder.
8. Frequently clean grinding dust from beneath grinder.
9. Wear a full face shield over ANSI-
approved safety goggles during use.
10. Do not grind with side of wheel unless wheel is
specifically designed for that type of grinding.
11.
DO NOT OpERATE WITH ANy GUARD
DISABLED, DAMAGED, OR REMOVED. Moving
guards must move freely and close instantly.
12. The use of accessories or attachments not
recommended by the manufacturer may
result in a risk of injury to persons.
13. When servicing use only identical replacement parts.
14. Only use safety equipment that has been approved
by an appropriate standards agency. Unapproved
safety equipment may not provide adequate
protection. Eye protection must be ANSI-approved
and breathing protection must be NIOSH-approved
for the specific hazards in the work area.
Summary of Contents for 61204
Page 1: ......
