User Manual
HORNO A GAS |
ROMA 76
13
Electrical Connection
Those ovens equipped with a three-pole power supply cable are designed to
operate with alternating current with the voltage and frequency indicated on the data
plate (located on the appliance) and in the instruction manual. The wire for earthing
the appliance is yellow-green in color.
Fitting on a power supply cable
Opening the terminal board:
Using a screwdriver, prise on the side tabs of the terminal board cover;
Pull open the cover of the terminal board
To install the cable, proceed as follows:
Remove the wire clamp screw and the three contact screws L-N
Fasten the wires beneath the screwheads using the following color scheme;
Blue
( N) Brown( L),
Yellow
-
Green
Fasten the supply cable in place with the clamp and close the cover of the
terminal board.
Summary of Contents for Roma 76
Page 1: ......
