User Manual
HORNO A GAS |
ROMA 76
12
In order to ensure adequate ventilation, the back panel of the cabinet unit must be
removed. Installing the oven so that it rests on two strips of wood is preferable. If the
oven rests on a continuous, flat surface, there must an aperture of at least
45*860mm.
The panels of the adjacent cabinets must be made of heat resistant material. In
particular, cabinets with a veneer exterior must be assembled with glues with glues
which can withstand temperature of up to 100.
In compliance with current safety standards, contact with the electrical parts of the
oven must not be possible once it has been installed.
To fasten the oven to the cabinet, open the door of the oven and attach it by
inserting the 4 wooden screws into the 4 holes located on the perimeter of the
frame.
Summary of Contents for Roma 76
Page 1: ......
