User Manual
HORNO A GAS |
OCEANÍA 60
6
If a socket and plug connection is used, verify that they are of the same type. Do not
use reducers, adapters or joints, as they can cause overheating or burns.
Si se utiliza una conexión permanente, la línea de alimentación eléctrica del
dispositivo debe estar equipada con un dispositivo de rotura omnipolar con un
espacio de contacto de al menos 3 mm, ubicado en una posición de fácil acceso
cerca del propio dispositivo.
Operation at 110-120 V ~:
use a three-wire cable type H05RR-F (3 x 1.5 mm²
cable).
The ground wire (yellow-green) must be at
least 20 mm longer than the other wires at
the end for connection to the appliance.
The manufacturer declines all responsibility for injuries or damages caused by
non-compliance with the previous standards or by manipulating even a single
part of the device.
Positioning the oven
Only a qualified person who complies with the instructions provided install the
device. The manufacturer declines all responsibility for improper installation, which
can harm people and animals and damage property.
Important:
the appliance's power supply must be cut before making adjustments or
maintenance work; it is assumed that the air duct is used in ventilation; Enclosures
with exterior cladding must be assembled with adhesives that can withstand
temperatures of up to 100.
Installation of built-in ovens
To ensure that the built-in device functions correctly, the enclosure that contains it
must be appropriate.
The appliance is designed for integrated installation (class 3) in cabinets of any
heat-resistant material. Comply with the dimensions shown in figures 1, 2 and 3.
Summary of Contents for OCEANIA 60
Page 1: ......
