5
Started
First:
Unpack and see the packlist enclosed with the Dispenser, then check all items. If there is any
discrepancy, please call us immediately.
a. Controller
1pcs
b. Drifton-ES 120x valve
1pcs (x = type of valve, see front page)
c. Foot pedal
1pcs
d. Plug
1pcs
e: Air tube
2pcs
f. Double barrel with piston 3set
g. Mixer nozzle (short)
2pcs
Second
: Power and compressed plant air should be available where the dispenser is to be set up. Be certain
your plant air is properly filtered and dry and a regulated, constant air pressure is supplied to the dispenser.
We have organized this operation manual to provide setup and testing procedures for the double syringe
dispensers.
Please see different content for the different dispensers
Next:
We will tell you how to dispense low viscosity fluid using the vacuum control and how to dispense
high viscosity liquid.
Principles
Drifton double liquid dispenser series quotes air pressure to control liquid fluid dispensing through high-
precision timing of pressure pulse control, which ensures that the correct amount of fluid is applied every
time, on every part, to every item. Time is more precise quantitative and will also be more prospective. A
Solenoid Valve provides higher response rate, and dispensing speed will be soon.
Drifton dispenser components:
Barrel, pistons, nozzle, high-precision tip, 1000J valve adapter, high precision controller (timing, pressure), it
is easy to operate and has a small volume. Only uses a little electricity and pressure. Maximum pressure is
7bar. It can be used for fluid materials of different viscosities. It has vacuum suction to prevent of liquid
down flow.
