07-01570B 03-06 Copyright 2007 Dri-Eaz Products, Inc. 1
Owner’s Manual – Studebaker AirPath™
Direct Flow Carpet Dryer
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA USA 98233
Fax: (360) 757-7950
Phone US: (360) 757-7776
www.dri-eaz.com
The Studebaker AirPath is a high velocity dryer that creates an aggressive airflow with its patented 360° air stream
to more quickly dry carpets and hard surface floors after cleaning.
Read And Save These Instructions
SAFETY INFORMATION
ELECTRIC SHOCK HAZARD
WARNING! Unit must be grounded.
•
Insert 3-prong plug on power cord
•
Do not use adaptor
•
Never cut off third prong
WARNING! Keep motor dry.
•
Do not operate outdoors. Use indoors only.
•
Do not use hose or pressure washer to clean unit.
Follow cleaning instructions in manual.
•
If motor becomes wet, allow it to dry before using.
WARNING! Unplug unit before servicing
.
SAFETY INSTRUCTIONS
•
Read and understand manual before operating.
•
Do not lift unit while turned on.
•
The output grill on the bottom of the unit vibrates
when unit is in operation. Do not touch grills when unit
is on.
•
Turn off all controls before unplugging. Unplug when
not in use. Do not unplug cord by pulling on cord,
instead pull on plug only.
Do not use cord to adjust
position or move the unit, instead use the handle.
•
Extension cords must be grounded and able to carry
12 amps at 115 volts.
•
Never operate a unit with a damaged power cord, as
this may lead to electrical or fire hazards. If power
cord is damaged, it must be replaced by a cord of the
same type and amperage rating.
•
Do not drop or throw the unit. Rough treatment can
damage the components or motor and may create a
hazardous condition or void the warranty.
•
Always operate the unit on a stable, level surface so it
cannot fall and cause injury.
•
Do not allow children to play with or around the unit.
Be sure the unit is inaccessible to children when not
attended.
INTRODUCTION
The Studebaker AirPath is a high-velocity 360° dryer for use in
commercial carpet or hard-surface floor cleaning to dry floors
more quickly.
The AirPath features:
•
Patented outlet grill design
•
360° directed airflow
•
8-blade axial fan
•
1 HP motor
•
Two-speed
switch
•
Stackable thermal formed ABS shell
•
2” wheels with casters
HOW TO USE THE AIRPATH
The AirPath is designed to blow air across wet surfaces for
speedy drying. The high-volume airflow increases the rate of
evaporation.
The AirPath will dry an area approximately 12’ x 12’. Place the
AirPath in the center of the area. When that section is dry,
move it to the center of the next section to be dried.
Ensure that all wet surfaces receive good airflow. Open interior
doors to maintain good air circulation. Doors may need to be
braced to prevent them from blowing shut.
WARNING