Dri-Eaz Sahara ProX3 115V, Owner'S Manual, Page: 3 / 12

3
Important Safety Instructions: Always disconnect the
TurboDryer from its power source before performing
any maintenance or cleaning.
T
O
C
LEAN INTERIOR
(
AS NEEDED
):
To remove grill and blower wheel:
1. Use a Phillips #2 screwdriver to remove 2 screws.
2. Remove inlet grill
.
3. Loosen the blower wheel shaft nut (3/8” socket driver)
.
Note the backstop for ensuring alignment when replac-
ing wheel.
4. Pull the blower wheel out of the unit.
1
2
3
4
3
To remove control panel and motor:
Rotate the unit onto its side so that the controls are facing up.
5. Unscrew 2 screws securing cord guard (#2 Phillips screwdriver).
6. Remove
cord guard.
7. Remove 4 motor mount bolts with 3/8” nutdriver.
8. Pull motor assembly out of the housing.
5
6
8
To reassemble unit:
Follow the steps above in reverse order (starting with #9).
Note:
Before tightening shaft nut on wheel, ensure that bolt is aligned with flat
spot on shaft (see photo A).
7
A
07-01537C 2013-01 Warranty 07-00419 3 Dri-Eaz Products, Inc.