background image

Contents

Technical Data __________________________________________________________ 2

Customer Information ____________________________________________________ 3

Product Description ........................................................................................................... 3
Proper Application.............................................................................................................. 3
Unsuitable Applications...................................................................................................... 3
Safety Instructions ............................................................................................................. 3

Operation   _____________________________________________________________ 4

Micro-Processor Controller ................................................................................................ 4
Main Display ...................................................................................................................... 5
Operating Modes ............................................................................................................... 5
Switching On...................................................................................................................... 5
Switching Off ...................................................................................................................... 5
Analogue Room Operating Panel with Heating Mode ....................................................... 6
Digital Room Operating Panel ........................................................................................... 8

Maintenance___________________________________________________________ 10

Safety Instructions for Filter Changes.............................................................................. 10
Changing Coarse Particle Filters ..................................................................................... 10
Changing the Fine Particle Air Filter ................................................................................ 12

Commissioning ________________________________________________________ 13

Pre-Requisites for Commissioning .................................................................................. 13
Initial Commissioning ....................................................................................................... 13
Decommissioning ............................................................................................................ 13

Menu levels  ___________________________________________________________ 14

Status Level - Viewing Operating Parameters ................................................................. 14
Technician Level - Setting Operating Parameters ........................................................... 16
Manufacturer Level - Factory Settings ............................................................................. 21
Overview – Current Operating Status .............................................................................. 21

Faults ________________________________________________________________ 22

Error Messages  .............................................................................................................. 22
Faults in the Ventilation System....................................................................................... 23

Important Unit Information (Logbook)  _____________________________________ 24

Page 1

Summary of Contents for aerosmart L





























Reviews: