User Manual
Version 1.2
2017-12-10
ConBee
– USB Dongle
www.dresden-elektronik.de
Page 29 of 33
Green low current LED: LG L29K-G2J1-24-Z by OSRAM (SMT package 0603)
Resistor 820 Ohms: RC0402FR-07820RL by YAGEO (SMT package 0402)
The signal pin description can be found in
Section 8
Table 10
.
Figure 7: USB Dongle status LEDs (default not assembled)
9. Radio certification
9.1.
United States (FCC)
The ConBee
contains the radio module ‘deRFmega256-23M12’, which is certified according
to FCC part 15. The FCC-ID of the radio module deRFmega256-23M12 is printed on a
vis
ible permanently affixed label on the top of the module’s RF shielding.
This product contains FCC ID: XVV-MEGA23M12
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
(FCC 15.19). The internal / external antenna(s) used for this mobile transmitter must provide
a separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter.
Modifications not expressly approved by the manufacturer could void the user's authority to
operate this equipment (FCC section 15.21).
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
Red LED
Series resistor
Series resistor
Green LED
