User Manual
Version 1.2
2017-12-10
ConBee
– USB Dongle
www.dresden-elektronik.de
Page 26 of 33
Program
(not assembled)
1
TCK
JTAG
2
GND
3
TDO
JTAG
4
VCC
3.3 V generated internally
5
TMS
JTAG
6
RESET
Reset signal for ZigBee USB
Gateway
7
VCC
3.3 V generated internally
8
NC
9
TDI
JTAG
10
GND
Trace
(not assembled)
1
TXD1
UART
2
VCC
3.3 V generated internally
3
NC
4
RXD1
UART
5
NC
6
GND
8. Hardware modifications for development
Besides the factory-default USB Dongle configuration it is also possible to modify the
hardware to enhance its functionality.
8.1.
Assemble the program header
The program header provides the microcontroller programming interface of the radio module.
Assemble a 50 mil 10-pin SMT header on the bottom side. We recommend the use of the
header FTSH-105-04-LM-DV-P by SAMTEC or a similar item.
The header pin description can be found in
Section 8
Table 11
. A detailed description of
suitable programmers and related software tools are listed in
[5]
.
