20
Battery Charge Indicator
This tool is equipped with a charge indicator
6.
A green light
will illuminate from the indicator while charging and will turn
off once fully charged.
When the battery is depleted, the tool will turn off automatical-
ly. This will be a sudden stop as opposed to a gradual slow
down of the tool. Simply recharge the tool.
Important Charging Notes
-
Lithium-ion battery will hold its charge while in storage for up
to 2 years so it’s always ready when you need it.
-
Fast charge the battery only when the battery temperature is
between 32˚F (0˚C) and 113˚F (45˚C).
-
A substantial drop in operating time per charge may mean
that the battery pack is nearing the end of its life and should
be replaced. For service of your tool, please contact Dremel
at 1-800-437-3635.
-
If battery does not charge properly:
a.
Check for voltage at outlet by plugging in some other elec-
trical device.
b.
Check to see if outlet is connected to a light switch which
turns power “off” when lights are turned off.
c.
Check USB terminals for dirt. Clean with cotton swab and
alcohol if necessary.
d.
Check to see if USB cable is properly connected to the tool
and the power adapter.
e.
If you still do not get proper charging, send tool and power
adapter to your Dremel Service Center.
Note:
Use of power adapters or battery packs not sold by Dremel
may void the warranty.
1605A000DGAB 02-21 7350_7300-PGT 6/2/21 9:21 AM Page 20
