Dreamus Astell & Kern SP1000 AMP, Quick Start Manual

Page: 7 / 24

Power adapter sold separately.
Always use certified power adapters.
5V, 2A is recommended for normal charging. Approximate
charging time is 4 hours.
9V, 1.67A is recommended for fast charging. Approximate
charging time is 2 hours and 20 minutes.
Using an adapter with specifications lower than 5V 2A may
cause damage to the adapter, SP1000, and/or amplifier.
The device will not charge when connected to a computer
via a USB Type-C cable.
Using a 12V adapter will not charge the device and may cause damage.
The manufacturer shall not be responsible for issues
caused by the use of adapters that do not adhere to the
recommended specifications.
FCCID: PAF21
This device complies with Part 15 of the FCC Rules, Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Charging
1. To charge the built-in battery of the SP1000 AMP, use
the SP1000 USB Type-C cable to connect to a power
adapter (sold separately).
White LED light: Charging.
LED light off: Charging complete.
2. When the amplifier is enabled, the battery status will
appear in the Notification Bar of the SP1000.
Design and specifications are subject to change without notice.
The appearance of the actual product may differ from the pictures.
ENGLISH
After connecting the SP1000 to the amplifier, select [AMP] from
the notification bar to turn on the amplifier.
It can be changed from the [Main Menu - Settings - AMP] option.
(Scroll Down Menu - AMP button)