7
MIRAGE-X manual Ver 1 Rev 1 12/2015
Caulk
Fig 3
Fig 4
1
2*
3
4
threshold
**
3.
Position your Bottom Guide Rail (#03)
onto the threshold and mark its position.
Use a tape measure to keep it parallel with
the threshold.
See Fig 3 for details
4.
Mark the position of the holes on the threshold
through the holes in the Bottom Guide Rail (#03)
*NOTE:
Use a power drill to make the holes using:
◾Ø1/8” drill bit (for installation into acrylic threshold)
◾Ø5/16” drill bit (using anchors into a tile threshold)**
Apply silicone to the underside of the Bottom Guide
Rail (#03) and attach it to the threshold using:
◾ST4.2 x 30mm TH screws (#16) OR
◾ST4.2 x 40mm TH screws (#21) (with anchors for
tile).
See Fig 4 for details
