16
MIRAGE-X manual Ver 1 Rev 1 12/2015
1
door
2
3
Fig 15
Fig 16
W
Trim the insert to: W-1/16”
15.
Install the Handle (#04) to the outside of the Door Glass (#02).(Fig 15.1)
Attach the Bumper Seal Strip (#13) to the closing edge of the Door Glass (#02). (Fig 15.2)
Apply silicone into the Bottom Guide Rail (#03) and install the Bottom Rail Insert (#12) (Fig 15.3).
See Fig 15 for details
16.
Measure from the edge of the panel glass to the wall and cut the
Bottom Rail Insert (#12) to this dimension: W-1/16”. File off any burrs
from the cut end. Apply silicone into the Bottom Guide Rail (#03) and
install the Bottom Rail Insert (#12).
