12
MIRAGE-X manual Ver 1 Rev 1 12/2015
Fig 11
4
2
1
5
6
3/8"
(Ø8mm)
3
11
10
0-1/16
”(2m
m)
9
8
Max 3/16” (4mm)
Max 3/16”(
4mm)
7
Left hand L-Bracket installation shown
11.
Position the L-bracket assembly (#05) onto the
Stationary Glass (#01) as shown and mark the position.
Remove the Wall Plate (#5.6) and mark the holes for
drilling Ø3/8”(10mm) holes and insert the wall anchors.
Attach the Wall Plate (#5.6) using ST4.2 x 40 (#5.7)
screws.
Re-attach the L-Bracket (#5.3) to the Wall Plate (#5.6)
and adjust the angle if necessary using the set screws
(Fig 11.7
&
11
.
8).
Adjust (+/- 3/16” (4mm) ) the Stationary Glass (#01) to
plumb and tighten the screws.
Attach the Decorative Cover (#5.4).
Secure the L-Bracket (#05) to the top of the Stationary
Glass (#01) using the clear gasket and rubber tipped set
screws.
See Fig 11 for details