“ENIGMA Z” Enclosure Rev.1 Ver.1 05/2013
14
16.
Parallel the
Stationary glass (02)
to the shower base or
threshold. Measure the distance from the
Return panel
(22)
to the far edge of the
Guide block (12)
.
This distance will be
“X”
Cut the
Anti-splash threshold (15)
to the size of
X
−
½
”.
Insert one side of the
Anti-splash threshold
fully into
the
Guide block
and cover the other side with the
Threshold bracket (16).
Parallel the
Anti-splash threshold
to the front edge of
the shower base or threshold and mark drilling hole for
the
Threshold bracket.
See Fig. 19 for details.
Fig. 19
17.
Drill the holes for the
Guide block
and the
Threshold bracket
using
Ø 1/8”
drill bit.
Apply silicone to the bottom of the
Anti-
splash
threshold and place it back into
designated position. Fasten the
Guide
block
and the
Threshold bracket
to the
shower base or threshold with the
Round
head screw ST4.2×25 (17).
Cover holes with the provided decorative
plugs.
See Fig. 20 for details.
Fig.
20
1
2
3
5
4
6
X”
X-1/2”
2
1 4 7
3
Ø1/8”
5
6
8
9
Ø1/8”
