© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
ENIGMA AIR ENCLOSURE Shower Enclosure manual Ver 1 Rev 4 062019
29
©2019 DreamLine. All Rights Reserved
!
Ø5/16”
Wall
Wall
Inside
1
2
6
7
Wall
Inside
3M Tape
Wall
3
4
5
Wall
Wall
Fig 35
Inside
NOTE:
The surfaces need to be clean and free of
construction debris before installing the bumper.
Wipe the area with an alcohol swab before
installation.
The
SafeStop™
Bumper
(#26)
is reversible for Left
or Right wall installation.
(Left wall installation shown
below from inside the shower)
TIP
: Use caution if using the screw method
to not crack the wall/tile and to avoid any
plumbing behind the wall.
Extender driver bit recommended
for screw installation method
35.
To
install the
SafeStop™ Bumper (#26) with the screw method:
position the
SafeStop™ Bumper
(#26)
onto the threshold on the stationary panel side of the installation and mark the position of the
hole on the wall. Drill a
Ø5/16”
hole and insert the
5/16” Wall Anchor (#16)
. Remove the
3M
Tape
backing and position the
SafeStop™ Bumper (#26)
onto the threshold
against the
U Channel (#01)
and
attach using the
ST4.2 x 55 Countersunk Screw (#21). (Fig 35)
