© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
12
ENIGMA AIR ENCLOSURE Shower Enclosure manual Ver 1 Rev 4 062019
©2019 DreamLine. All Rights Reserved
4
2
1
Ø5/16”
(8mm)
Fig 4
Fig 3
W2
W2
W2
outside
3
4.
Set the
U-Channel (#01)
aside and drill the holes in the wall using a
Ø5/16”
drill bit and insert
the
Ø5/16“ Plastic
Wall Anchors (#16)
into the holes.
Apply silicone into the screw holes and to the
back surface of the U-channel. Attach the
U-Channel (#01)
to the wall using the
ST4.0×40 Pan Head
Screws (#17). (Fig 4)
3.
Align the outside edge of the
U-Channel (#01)
with the inside of the mark from the previous step on
the return panel side of the unit. Level the
U-Channel (#01)
vertically (plumb), mark the position of the
U-Channel (#01)
on the wall, and mark the four holes for drilling through the pre-drilled holes in the
U-Channel. The placement of this U-Channel must create an opening that is within the model dimensions
of the door section, depending on the model size:
<48” (
SHEN-6434480)
or
<54” (SHEN-6434540)
or
<60” (SHEN-6434600)
See the
“Shower Enclosure Plan”
on
Page 11
for overall dimensions.
(Fig 3)
