http://dreamcatcher.asia/cw
ME1000 RF Circuit Design
Quick Start Guide - 4/23
1. Read Me First
Congratulations on your purchase of the ME1000 RF Circuit Design courseware! Please read this
Quick Start Guide carefully to ensure you get the most out of your investment in this solution.
This courseware includes the following items:
Item
Quantity Description
CD
1
o
Teaching slides (Microsoft
®
PowerPoint
®
format)
o
Lab sheets (Microsoft
®
Word format)
o
Problem-based assignments (Microsoft
®
Word format)
o
CAE design files (based on Agilent ADS and Genesys software)
o
Measurement Automation Program (Agilent VEE format)
o
Windows-based RF Trainer Control Panel software
ME1000 RF Circuit
Design Training Kit
1
Transmitter unit and receiver unit
Antennas
2
One each for the transmitter unit and the receiver unit
Calibration kit
1
Thru-Reflect-Match (TRM) standard calibration kit
RF power combiner
1
Power combiner for OIP3 measurement
Jumper cables
9
SMA(m)-to-SMA(m) coaxial cables (0.18 m)
Coaxial cables
2
SMA(m)-to-SMA(m) coaxial cables (1 m)
USB cables
3
USB cables
RF connectors
2
N(m)-to-SMA(f) adapter
Ground cables
2
For grounding purpose (1 m)
The following items are not included in this solution but are required/recommended:
•
One PC running Microsoft
®
Windows 2000/XP/Vista/7
®
with a minimum of 512 MB RAM and
USB ports
•
Appropriate measurement instruments and software (see Section 3.6, "Lab Station" for
details)
•
Appropriate Train-the-Trainer Program (see Section 3.7, "Train-the-Trainer Program" for
details)
Complete the steps in Section 4, "Quick Setup and Verification" to start using the ME1000 RFCD TX
(transmitter unit) and RX (receiver unit).
Thank you for your purchase and do contact us (see Section 5, "Support and Warranty") if you require
any assistance.
IMPORTANT
The ME1000 RF Circuit Design training kit can be damaged by excessive power levels from the
instruments. Please adhere strictly to the power levels recommended in the instructions.
