http://dreamcatcher.asia/cw
ME1000 RF Circuit Design
Quick Start Guide - 12/23
Step 2 : Powering Up the Transmitter Unit and Receiver Unit
•
Connect the transmitter unit
and receiver unit to the PC
using the USB cables.
Powering Up the Transmitter Unit
•
Select TX Unit from Control
Panel 1.
•
Click Connect to RF Trainer.
•
The green LED on the control
unit of the transmitter will blink
once, indicating a successful
connection.
Powering Up the Receiver Unit
•
Select RX Unit from Control
Panel 2.
•
Click Connect to RF Trainer.
•
The green LED on the control
unit of the receiver will blink
once, indicating a successful
connection.
Receiver unit
USB cable
Transmitter unit
1
USB cable
1
3
Control unit of the transmitter
4
Control Panel 1
1
3
4
2
6
7
5
Control Panel 2
5
6
7
Control unit of the receiver
2
