DreamCatcher ME1000 RF, Quick Start Manual, Page: 15 / 23

http://dreamcatcher.asia/cw
cw.enquiry@dreamcatcher.asia
ME1000 RF Circuit Design
Quick Start Guide - 15/23
Step 4 : Verifying the Receiver Unit
•
Click Frequency Synthesizer
Off to turn it on. Set the
frequency to 818 MHz.
Verifying the Synthesizer
•
Connect the spectrum analyzer
to the Synthesizer Out port.
•
Check if the output signal from
the frequency synthesizer is
correct.
Verifying the Mixer
•
Click Mixer Off to turn on the
mixer.
Receiver unit
Synthesizer Out port
2
RX control panel
RX control panel
Spectrum analyzer
1
1
2
3
3
4
4
N9320B Spectrum Analyzer setting:
Center Freq: 818 MHz
[Frequency] > [818] > {MHZ}
Span: 10 MHz
[SPAN] > [10] > {MHZ}