Dream-Flight alula TREK, Flight And Assembly Manual

Page: 9 / 32

ITEMS REQUIRED FOR COMPLETION (not included)
Radio Gear:

Programmable 6 channel radio system with Elevon Mixing and Dual Rates (see suggestion below)
 Micro receiver, 4-6 gram weight (see chart below for receiver suggestion)

(2) Sub-micro servos (Part DFFA005 recommended, or purchase our Alula-TREK flight pack, Part DFFA008)
 Receiver battery: 4.8V 300mAh 1/3AA NiMH (Part DFFA001)

Battery Extension Wire (Part DFFA013)
Tools and Extras:

Small Phillips screwdriver
 Small wire or fingernail clippers for trimming servo arms

Sharp hobby knife or razor blade for relieving foam hinges
 Small needle-nose pliers

Ruler or measuring tape (for setting control surface deflections)
 Small weights for balancing and Ballast Option: Use our non-lead Steel Balance Weights (Part DFAA002)
Adhesives and Tape:

Blenderm Tape (Part 1525-0) for securing wing panels and making small repairs
 20-25mm (1”) wide painter's masking tape – we like the blue or green stuff by 3M!
Optional:

Packing tape and strapping tape for airframe reinforcement and repair

Acrylic paints - add your personal style! Remember to clean foam with denatured alcohol first.
Suggested Transmitter and Receiver:
Transmitter Receiver
Futaba T6J, *T8J *R2106GF
*We used the Futaba T8J 2.4GHz transmitter
and Futaba R2106GF receiver for our own
setup. The R2106GF receiver's extremely short
antenna makes installation a breeze! The T8J
transmitter features a special built-on antenna
for durability, and boasts easy to use, yet very
comprehensive, programming features.
2.