Dreadbox Erebus V3 Ctrlr panel documentation and instructions
v2.0
Page 43 of 49
Saving a patch as a Erebus V3 Logic preset
You can save the last patch saved in the panel as a plugin preset in Logic by selecting
Save As
in the
pulldown menu of the preset area at the top of the plugin window. An .aupreset file will be created.
Saving a patch as a Erebus V3 Logic channel strip preset
You can save the last patch saved in the panel as a channel strip preset in Logic by clicking on the
Setting button at the top of the channel strip in the mixer and selecting Save Channel Strip Setting
as…. Note that this is different than saving a plugin preset.
Creating a new track from a Logic channel strip setting
This is not possible directly but well in two steps. First, create a new Software Instrument track then
click on the Setting button at the top of the channel strip in the mixer and select a previously saved
channel strip setting.
Replacing the preset on an existing track by another preset
This is working well when selecting a previously saved .aupreset file. Just select another previously
saved preset by selecting
Load
in the top left menu of the plugin window. All buttons will be
positioned according to the newly loaded preset, patch cables and all labels will be restored.
This is also working fine with Channel Strips Settings. When replaced, a popup indicates that the Last
file used “xxx” has been restored.
