Dreadbox Erebus V3 Ctrlr panel documentation and instructions
v2.0
Page 18 of 49
Patch points
You modify the from/to patches as follows:
Clicking anywhere on a patch line (label, input, output, blank space) will select the patch to be
modified and display its values in the pull-downs. You modify the “From” source and/or “To”
destination and press the Proceed button to make the change.
You can also directly select a patch cable in the
Patch
pull-down then modify the
From/To
and press
Proceed
.
Use the
Unpatch
button to delete a patch cable or the
Unpatch
All
button to delete all of them at
once.
Use the
Cables
button to switch the display on the main panel between patch cables and just cable
plugs. This button will be locked on Cables display as soon as the same input or output is used two
times.
Use the
Cables transparency
rotary to set the transparency of the patch cables (not the end plugs).
Patches are numbered 1 to 9 and have a color assigned to them. When a from/to patch is set in the
Envelopes and Patches
tab, corresponding patch cables are displayed on the main Erebus tab and
corresponding colored numbered circles are displayed on the patch sheet.
Numbered circles are used to help colorblind people.
